NiKo

ProSettingsCounter-Strike: Global Offensive, FaZe Clan532 Comments

NiKo

NiKo

aka.: niko, NiKolinho

FaZe Clan


Nikola “NiKo” Kovač was born on February 16, 1997 and is currently playing for FaZe Clan as a rifler.



Mouse Settings – Zowie EC2-B

  • DPI

    400

  • Sensitivity

    1.38

  • eDPI

    552

  • HZ

    1000


  • Zoom Sensitivity

    0.80

  • Mouse Accel.

    0

  • Windows Sens.

    6

  • Raw Input

    1


Video Settings – BenQ XL2540

  • Resolution

    1024×768

  • Aspect Ratio

    4:3

  • Scaling Mode

    stretched

  • HZ

    240


Crosshair

  • cl_crosshairsize 1; cl_crosshairgap -1; cl_crosshairthickness 0.4; cl_crosshaircolor 5; cl_crosshaircolor_b 144; cl_crosshaircolor_g 195; cl_crosshaircolor_r 27; cl_crosshairdot 1; cl_crosshairstyle 5; cl_crosshairalpha 250; cl_crosshairgap_useweaponvalue 0; cl_crosshairusealpha 1; cl_crosshair_drawoutline 0; cl_crosshairscale 120; cl_crosshair_dynamic_maxdist_splitratio 0.35; cl_crosshair_dynamic_splitalpha_innermod 1; cl_crosshair_dynamic_splitalpha_outermod 0.5; cl_crosshair_dynamic_splitdist 7;

Viewmodel

  • viewmodel_fov 65; viewmodel_offset_x 2; viewmodel_offset_y 1.5; viewmodel_offset_z -1; viewmodel_presetpos 0; cl_viewmodel_shift_left_amt 1.5; cl_viewmodel_shift_right_amt 0.75; viewmodel_recoil 0; cl_righthand 1;
    

Config / CFG

Config

Gear – Click to check!

532 Comments on “NiKo”

    1. You have to place NiKo’s config here: C:\Program Files (x86)\Steam\userdata\YOURSTEAMID\730\local\cfg

    1. Here you go, NiKo’s video settings:

      Brightness – 1.6
      Color Mode – Computer Monitor
      Global Shadow Quality – High
      Model / Texture Quality – Low
      Effect Detail – Medium
      Shader Detail – Low
      Multicore Rendering – Enabled
      Multisampling Anti-Aliasing Mode – 8x MSAA
      Texture Filtering Mode – Antisotropic 8x
      FXAA Anti-Aliasing – Disabled
      Wait for Vertical Sync – Disabled
      Motion Blur – Disabled

    1. NiKo’s resolution was shown in an instagram story by him in the major qualifier while playing aim_botz. 🙂

        1. I sent him a message to confirm on twitter, hopefully he answers. I reverted NiKo’s resolution to 1024×768 since it looks like 1024×768 stretched on TACO’s instagram story. 🙂

    1. In my screen is the same position as in screen and i use 1280×960 … idk why is different at you

      1. Just tested it out myself and NiKo’s resolution is definitely 1024×768, thanks to both of you for testing it out! 🙂

        1. My bad, switched my game to 1024×768 and used my phones camera and it’s the looks the same as niko’s IG story, most likely 1024×768 indeed, sorry!

  1. Hello dude, i falled in love with niko’s old config setups but he changed his config setup, can you write his old config for here, or permalink? Thanks for now :3

    1. Only thing that changed in NiKo’s config is cl_hud_color 2 and cl_crosshaircolor was yellow before. Just revert that. 🙂

  2. But i used niko’s config yesterday and crosshairoutline was too long than before, or i must control again, thanks! 🙂

  3. When was this last updated. Thank you. The comments should with date and time. Would be great. Great website!!

    1. Yes, NiKo’s resolution is 1024×768. You can see it better on the other videos / pictures of NiKo’s screen at the major. 🙂

    1. Here you go, NiKo’s viewmodel straight from NiKo’s config:

      viewmodel_fov “65”
      viewmodel_offset_x “2”
      viewmodel_offset_y “1.5”
      viewmodel_offset_z “-1”

      cl_viewmodel_shift_left_amt “1.5”
      cl_viewmodel_shift_right_amt “0.75”
      cl_bob_lower_amt “5”
      cl_bobamt_lat “0.100000”
      cl_bobamt_vert “0.100000”
      cl_bobcycle “0.98”

  4. Can someone share his BenQ XL2540 Monitor Settings ? (Brightness, Contrast, AMA, Picture Mode, Black Equalizer,…) ?

    1. Here you go, NiKo’s BenQ monitor settings: Black eQ: 5, Color Vibrance: 15, Picture Mode: Gamer1, Bright: 100, Contrast: 50, Sharpness: 10, Color Temperature; User Define: R 100 G 100 B 100.

    1. Here you go, NiKo’s interp settings straight from NiKo’s config:

      cl_interp “1”
      cl_interp_ratio “2”

    1. Here you go, NiKo’s launch options:

      -noforcemaccel -noforcemspd -noforcemparms -freq 144 -console -novid -tickrate 128

    1. Yes, NiKo’s zoom sensitivity was always 0.8 in all of his configs apart from his steam profile which is very outdated. 🙂

    1. NiKo’s crosshair is not yellow anymore but not blue either. Make sure to use all the commands of his crosshair. Especially these for the crosshaircolor: cl_crosshaircolor_b 144; cl_crosshaircolor_g 195; cl_crosshaircolor_r 27;

  5. What hud color he have right now? I think he have green in am not sure .THx for good website srry for bad english.

    1. Just download NiKo’s config above, it’s with the correct HUD (You are correct it’s green). 🙂

    1. NiKo’s zoom sensitivity was always 0.8 apart from the one time he released information on his steam profile. NiKo’s zoom sensitivity is 0.8 right now. 🙂

    1. Just download NiKo’s config in the post above, it has all the updated information you need. NiKo’s pistol of choice is the CZ-75. 🙂

      1. I downoald the cfg but the color of the hud is not green and its aqua and the hud i s the max one is this corect THX

          1. Aha its not green it is aqua k i thinked it was green thx fore fast response.

    1. Here you go, NiKo’s cl_bob settings:

      cl_bob_lower_amt “5”
      cl_bobamt_lat “0.100000”
      cl_bobamt_vert “0.100000”
      cl_bobcycle “0.98”

    1. Here you go, NiKo’s HUD settings straight from NiKo’s config:

      cl_hud_background_alpha “1.000000”
      cl_hud_bomb_under_radar “1”
      cl_hud_color “9”
      cl_hud_healthammo_style “0”
      cl_hud_playercount_pos “0”
      cl_hud_playercount_showcount “0”
      cl_hud_radar_scale “1.145000”

    1. Here you go, NiKo’s radar settings straight from his config:

      cl_radar_always_centered “1”
      cl_radar_icon_scale_min “0.6”
      cl_radar_rotate “1”
      cl_radar_scale “0.4”
      cl_radar_square_with_scoreboard “1”
      cl_hud_bomb_under_radar “1”
      cl_hud_radar_scale “1.145000”

  6. I will give the link to the video with his radio ://www.youtube.com/watch?v=INPyFtCKaYQat sec 12 niko have the radar bigger im prety sure pls check and go with u opinion Thx

    1. NiKo’s radar is already pretty big (cl_hud_radar_scale “1.145000”). Also make sure to test it with NiKo’s resolution (1024×768 4:3 stretched). He is definitely using the radar settings I posted. 🙂

    1. Here you go, NiKo’s viewmodel straight from NiKo’s config:

      viewmodel_fov “65”
      viewmodel_offset_x “2”
      viewmodel_offset_y “1.5”
      viewmodel_offset_z “-1”
      viewmodel_presetpos “1”
      cl_viewmodel_shift_left_amt “1.5”
      cl_viewmodel_shift_right_amt “0.75”

    1. Almost all the information in NiKo’s twitch is outdated unfortunately. NiKo’s monitor is the BenQ XL2540. 🙂

  7. But in NiKos “old” stream he says that he need to use the 1280×960 cause the 1024×768 is to blury on his new monitor.

    1. Interesting but you can clearly see that NiKo’s resolution is 4:3 1024×768 stretched from the net_graph on various screenshots he posted which are more recent. 🙂

      Also NiKo’s monitor is not the 27″ BenQ XL2735 anymore which makes it less blurry. 🙂

    1. Here you go, NiKo’s launch options:

      -noforcemaccel -noforcemspd -noforcemparms -freq 240 -console -novid -tickrate 128

    1. Yes, NiKo’s resolution is 1280×960 4:3 stretched right now. We got it confirmed by a FaZe Clan manager. 🙂

    1. We contacted a FaZe Clan manager and he confirmed that NiKo’s resolution is 1280×960 4:3 stretched at IEM Katowice. 🙂

    1. Here you go, NiKo’s video settings:

      Brightness – 1.6
      Color Mode – Computer Monitor
      Global Shadow Quality – High
      Model / Texture Quality – Low
      Effect Detail – Medium
      Shader Detail – Low
      Multicore Rendering – Enabled
      Multisampling Anti-Aliasing Mode – 8x MSAA
      Texture Filtering Mode – Antisotropic 8x
      FXAA Anti-Aliasing – Disabled
      Wait for Vertical Sync – Disabled
      Motion Blur – Disabled

  8. How do I know when you update the config? Is there any indicator? 🙂
    Also, is there any way to contact NiKo? Because I have noticed, that he has an outdated command in his config (snd_mixahead “0.05”), which could be set to 0.02 for less sound delay, and I want to tell him somehow.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.