shroud
- Home
- Pro Lists
-
Players
- Counter-Strike: Global Offensive
- FortniteOur Database of the Settings, Gear and Configs of Fortnite Players.
- Overwatch
- PlayerUnknown’s BattlegroundsOur Database of the Settings, Gear and Configs of PlayerUnknown’s Battlegrounds Players.
- Realm RoyaleOur Database of the Settings, Gear and Configs of Realm Royale Players.
- Guides
- Reviews
- Library
- BLOG
shroud
Streamer
111 Comments on “shroud”
shroud uses 2.5
Fixed it, thank you! 🙂
weird his twitch bot says he’s using 2.1 400dpi
Fixed once again! 🙂
shroud video setings???
Here you go, shroud’s video settings:
Brightness – 1.6
Color Mode – Computer Monitor
Global Shadow Quality – High
Model / Texture Quality – Low
Effect Detail – Low
Shader Detail – Low
Multicore Rendering – Enabled
Multisampling Anti-Aliasing Mode – 4x MSAA
Texture Filtering Mode – Antisotropic 4X
FXAA Anti-Aliasing – Disabled
Wait for Vertical Sync – Disabled
Motion Blur – Disabled
What’s shroud cl_bob plz
Here you go, straight from shroud’s config:
cl_bob_lower_amt “5.000000”
cl_bobamt_lat “0.100000”
cl_bobamt_vert “0.100000”
cl_bobcycle “0.980000”
He is using 2 now, he said on stream
Fixed, thank you! 🙂
In his config included in the zip his m_customaccel_exponent is “1.000000” but here it says his Mouse Accel is 0. Can you clarify please?
Updated shroud’s config to the latest one. 🙂
500hz ?
Fixed, thank you! 🙂
This guy is often change his sense. What’s the real one?
Shroud’s sensitivity is correct on this page! 🙂
He use 2.2 with 400 dpi, from his command chat on twitch
Fixed shroud’s sensitivity, thank you! 🙂
he uses 1.25 sens on latest stream with 400 dpi
I just went through shroud’s latest streams and shroud’s sensitivity is still the same. Could you send a source? 🙂
Dude i know shroud stop playing csgo but he play like 1 day ago and you can upload his crosshair? please
Updated shroud’s crosshair, thank you! 🙂
whats the raw viewmodel i dont want to have the cfg
Here you go, shroud’s viewmodel:
Viewmodel_fov “68”
viewmodel_offset_x “2.5”
viewmodel_offset_y “1”
viewmodel_offset_z “-1.5”
In the config its at 2 on this it says its 2.2
Updated shroud’s config, thank you! 🙂
where did you get that sensitivity?
Shroud’s sensitivity was shown by him on stream yesterday. 🙂
whats edpi?
Sensitivity * DPI = eDPI. 🙂
according to his twitch !sens command his current sens is 400 2.2
Fixed shroud’s sensitivity, thank you! 🙂
Can you please update his crosshair?
Updated shroud’s crosshair, thank you! 🙂
Are you sure he use hyper x furys pro, I thought he use g640
Yes, shroud’s mousepad has been the HyperX Fury S Pro ever since HyperX sponsored Cloud9. 🙂
Ever since HyperX became Cloud9’s peripherial sponsor. HyperX is sponsoring C9 for a long time
True, I should have said ever since Logitech stopped sponsoring Cloud9 resulting in HyperX being the only peripheral sponsor of Cloud9. 🙂
He use sens 2.5
Are you sure? shroud’s sensitivity is still 2.2 in his twitch !sens command. 🙂
2.5 sens
shroud’s sensitivity is still 2.2 in his twitch !sens command. Can you post your source?
What is his video settings right now?
Here you go, shroud’s video settings:
Brightness – 1.6
Color Mode – Computer Monitor
Global Shadow Quality – High
Model / Texture Quality – Low
Effect Detail – Low
Shader Detail – Low
Multicore Rendering – Enabled
Multisampling Anti-Aliasing Mode – 4x MSAA
Texture Filtering Mode – Antisotropic 4X
FXAA Anti-Aliasing – Disabled
Wait for Vertical Sync – Disabled
Motion Blur – Disabled
in his twitch he says he use 2.5 I mean in his twitch porfile
shroud’s sensitivity is 2.2 in his twitch commands which is more updated. 🙂
crosshair update?
Fixed shroud’s crosshair, thank you! 🙂
isn’t cl_crosshair_drawoutline 1?
Fixed shroud’s crosshair, thank you! 🙂
whats his video settings
Here you go, shroud’s video settings:
Brightness – 1.6
Color Mode – Computer Monitor
Global Shadow Quality – High
Model / Texture Quality – Low
Effect Detail – Low
Shader Detail – Low
Multicore Rendering – Enabled
Multisampling Anti-Aliasing Mode – 4x MSAA
Texture Filtering Mode – Antisotropic 4X
FXAA Anti-Aliasing – Disabled
Wait for Vertical Sync – Disabled
Motion Blur – Disabled
Crosshair alpha?
Added it to shroud’s crosshair in the post. 🙂
How do I use shrouds autoexec? Like whhere do I place it? ty :))
You have to place shroud’s autoexec here: C:\Program Files (x86)\Steam\userdata\YOURSTEAMID\730\local\cfg
He has a new crosshair i saw it in the latest stream at 11:00:45 when he opened up CSGO, don’t know which one is it tho or information about it
.
Fixed shroud’s crosshair, thank you! 🙂
Shroud m_yaw and pitch?
Here you go, straight from shroud’s config:
m_yaw “0.022”
m_pitch “0.022”
Could you update his settings i think shroud streamd yesterday or two days ago csgo and i think he has a new crosshair
shroud’s crosshair is from his latest stream. It’s updated. 🙂
Heya! Check out he has changed his crosshair: https://www.youtube.com/watch?v=ZsLtvGuGU44!
And may I have video settings, please? Thx
Fixed shroud’s crosshair, thank you! 🙂
Also here are shroud’s video settings:
Brightness – 1.6
Color Mode – Computer Monitor
Global Shadow Quality – High
Model / Texture Quality – Low
Effect Detail – Low
Shader Detail – Low
Multicore Rendering – Enabled
Multisampling Anti-Aliasing Mode – 4x MSAA
Texture Filtering Mode – Antisotropic 4X
FXAA Anti-Aliasing – Disabled
Wait for Vertical Sync – Disabled
Motion Blur – Disabled
Anyone know/remember what shrouds peripherals were before? like his mouse keyboard and headset previously?
Shroud’s mouse was always the Logitech G303. He used the Logitech G Pro Mechanical Keyboard and the Logitech G533 before he switched to HyperX. 🙂
Shroud’ s launch options are?
Unfortunately shroud’s launch options were never shared by him. 🙁
from shrouds twitch command: CS launch options: -novid, -high, -tickrate 128 , freq 144 (only on LAN)
True, the command is slightly outdated though. These are shroud’s launch options: -novid, -high, -tickrate 128 , freq 240 (only on LAN)
What is his viewmodel and cl_bob settings? Thanks!
Here you go, shroud’s viewmodel straight from shroud’s config:
viewmodel_fov “68”
viewmodel_offset_x “2.5”
viewmodel_offset_y “1”
viewmodel_offset_z “-1.500000”
viewmodel_presetpos “0”
cl_viewmodel_shift_left_amt “0.500000”
cl_viewmodel_shift_right_amt “0.250000”
Also the cl_bob settings straight from shroud’s config as well:
cl_bob_lower_amt “5.000000”
cl_bobamt_lat “0.100000”
cl_bobamt_vert “0.100000”
cl_bobcycle “0.980000”
What is his benq settings?
You can find shroud’s BenQ monitor settings here: http://on-winning.com/best-benq-monitor-settings/
Hud settings + Radar settings?
You can download shroud’s config above which includes his HUD and radar settings. 🙂
He uses 2.40 sens now source his stream rn
Fixed shroud’s sensitivity, thank you! 🙂
is that the sens of shroud ? prof?
shroud’s sensitivity was shown in his latest CS:GO stream. 🙂
what is his m_yaw?
Here you go, straight from shroud’s config: m_yaw “0.022”
he is using the Intel Core i9-7900X Processor not the i7
Shroud’s PC for gaming still has the i7-8700K. He uses the i9-7900X in his streaming PC. 🙂
hello can you please help me to use cfg?? ive downloaded it but idk how to use it on my csgo
You can follow this video if you want to use shroud’s config but don’t know how to: https://www.youtube.com/watch?v=cM2aFPTjpT4
He uses sharpness 10 as said on this video https://www.youtube.com/watch?v=O9YoUwoOuw0 time 2:12 and the video you used for his settings this was a month after in August the other video where he shows you his was July.
He says 12 but you can’t get 12 anymore it’s 10!
Thank you for sharing this information about shroud’s BenQ monitor settings. 🙂
video settings and interp plz
Here you go, shroud’s video settings:
Brightness – 1.6
Color Mode – Computer Monitor
Global Shadow Quality – High
Model / Texture Quality – Low
Effect Detail – Low
Shader Detail – Low
Multicore Rendering – Enabled
Multisampling Anti-Aliasing Mode – 4x MSAA
Texture Filtering Mode – Antisotropic 4X
FXAA Anti-Aliasing – Disabled
Wait for Vertical Sync – Disabled
Motion Blur – Disabled
Unfortunately shroud’s interp settings were never shared by him. 🙁
Interp and rate is all different for everyone don’t use other people’s because everyone has different internet so head to speedtest.net see what your download and ping is and you base it off that and prosettings his interp settings are interp ratio 1 and interp 0.007813. Hope this helps 🙂
That is absolutely correct. Thank you for sharing shroud’s interp settings. 🙂
what would be shroud sensitivity on 800DPI?
Shroud’s sensitivity on 800 DPI would be 1.2. 🙂
what is the polling rate
1000hz have a nice week ahead of you! 🙂
Thank you for sharing shroud’s mouse hz. 🙂
gap -2 thickness 1.15 🙂 thx in advance
Fixed shroud’s crosshair, thank you! 🙂
hi
shrouds crosshair isnt that big and thick anymore
http://prntscr.com/kzccan
and his crosshair sniper width is 2
Fixed shroud’s crosshair, thank you! 🙂
btw he is using the HyperX Alloy FPS RGB as shown on todays stream 🙂
Fixed shroud’s keyboard, thank you! 🙂
Cl_Crosshairsize 5 look at his last streams 🙂
Fixed shroud’s crosshair, thank you! 🙂
shroud is now using crosshair style 1
Fixed shroud’s crosshair, thank you! 🙂
shroud use crosshair color 3 not 4
Fixed shroud’s crosshair, thank you! 🙂
Whats his net_graph placement?
You can download shroud’s config above which has what you are looking for. 🙂