NAF
aka.: NAF-FLY
Team LiquidMouse Settings – Zowie EC1-A
-
DPI
400
-
Sensitivity
1.20
-
eDPI
480
-
HZ
1000
-
Zoom Sensitivity
0.856
-
Mouse Accel.
0
-
Windows Sens.
6
-
Raw Input
1
Video Settings – NVIDIA GeForce GTX 1080 Ti
-
Resolution
1280×960
-
Aspect Ratio
4:3
-
Scaling Mode
stretched
-
HZ
240
Crosshair
cl_crosshairsize 3; cl_crosshairgap -1; cl_crosshairthickness 0.4; cl_crosshaircolor 5; cl_crosshaircolor_b 144; cl_crosshaircolor_g 195; cl_crosshaircolor_r 27; cl_crosshairdot 1; cl_crosshairstyle 5; cl_crosshairalpha 250; cl_crosshairgap_useweaponvalue 0; cl_crosshairusealpha 1; cl_crosshair_drawoutline 0; cl_crosshairscale 120; cl_crosshair_dynamic_maxdist_splitratio 0.35; cl_crosshair_dynamic_splitalpha_innermod 1; cl_crosshair_dynamic_splitalpha_outermod 0.5; cl_crosshair_dynamic_splitdist 7;Viewmodel
viewmodel_fov 68; viewmodel_offset_x 2.5; viewmodel_offset_y 0; viewmodel_offset_z -1.5; viewmodel_presetpos 3; cl_viewmodel_shift_left_amt 1.5; cl_viewmodel_shift_right_amt 0.75; viewmodel_recoil 0; cl_righthand 1;
46 Comments on “NAF”
Stretched or bb ? Outside says bb inside says stretched also QcK heavy it’s his current mousepad?
NAF’s resolution is 1280×960 4:3 stretched, fixed it, thank you! 🙂
Source about his sens?
Here you go, source for NAF’s sensitivity: https://twitter.com/NAFFLY/status/963511228730494976
Can i have his viewmodel?
Here you go, NAF’s viewmodel:
viewmodel_fov “68”
viewmodel_offset_x “2.500000”
viewmodel_offset_y “0”
viewmodel_offset_z “-1.500000”
viewmodel_presetpos “3”
cl_viewmodel_shift_left_amt “0.500000”
cl_viewmodel_shift_right_amt “0.250000”
NAF Video Settings?
Unfortunately NAF’s video settings were never shared by him. 🙁
NAF’s video settings
Medium
Low
Low
Medium
X4
X4
Source: https://twitter.com/NAFFLY/status/963332197368324097
Thank you for sharing NAF’s video settings. 🙂
https://play.esea.net/users/383209 sens 0.7 rawinput 1 240 hz
i am pretty sure this is lasted sensitivity cuz rawinput 0 has problem on win10.
Updated NAF’s config & sensitivity, thank you! 🙂
NAF is using the black version of EC1-A. (ESL S7)
Fixed NAF’s mouse, thank you! 🙂
Source about his crosshair?
It’s from NAF’s config which he uploaded recently. 🙂
His Launch Options Plz
Unfortunately NAF’s launch options were never shared by him. 🙁
https://twitter.com/NAFFLY/status/963333627432939520
Thank you for sharing NAF’s launch options & video settings, thank you! 🙂
Hey there, when was the crosshair last updated in his cfg (roughly)? Another site lists the crosshair as different and I dont know which one is correct (this other site was updated 13/02/2018) thanks!
NAF’s crosshair got updated on the April 19, 2018. 🙂
Also, NAF is currently using zowie g-sr check any of the recent hltv galleries think he tweeted about it before the major too
Fixed NAF’s mousepad, thank you! 🙂
NAF Interp ?
Unfortunately NAF’s interp settings were never shared by him. 🙁
do you have his viewmodel?
Here you go, NAF’s viewmodel straight from NAF’s config:
viewmodel_fov “68”
viewmodel_offset_x “2.500000”
viewmodel_offset_y “0”
viewmodel_offset_z “-1.500000”
viewmodel_presetpos “3”
cl_viewmodel_shift_left_amt “1.5”
cl_viewmodel_shift_right_amt “0.75”
bob settings
Here you go, straight from NAF’s config:
cl_bob_lower_amt “5”
cl_bobamt_lat “0.100000”
cl_bobamt_vert “0.100000”
cl_bobcycle “0.98”
is his zoom sens 0.85 or 1?
in the list it says 0.85 and on his profile here 1
NAF’s zoom sensitivity is 0.856 currently. Fixed it above, thank you! 🙂
NAF monitor vibrance?
Unfortunately NAF’s digital vibrance was never shared by him. 🙁
Change sens to 0.7 here is full config on esea profile
It’s not up to date unfortunately. 🙁
from where comes the 0.6 then
Here you go, source for NAF’s sensitivity: https://twitter.com/NAFFLY/status/1023361957179609093
settings and calibration for Alienware monitor ? Thx.
Unfortunately NAF’s monitor settings were never shared by him. 🙁
He is using 400 dpi in IEM Chicago
Fixed NAF’s sensitivity & DPI, thank you! 🙂
Is there a source behind the 400 dpi claim?
NAF’s mousewheel is red that means his DPI is 400. 🙂
0.7 sensitivity in a config
Fixed NAF’s sensitivity in NAF’s config, thank you! 🙂